NSN 5935-00-132-2405 · NIIN 001322405 · FSC 5935
NO DASHES 5935001322405
In Stock
SOCKET,PLUG-IN ELECTRONIC COMPON
Connectors, Electrical
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | SADDLE COPPER ALLOY |
| MATT | MATERIAL | CONTACT COPPER ALLOY |
| AAQL | BODY STYLE | |
| AARN | FABRICATION METHOD | MOLDED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.125 |
| ABJH | TEMP RATING | CELSIUS 100.0 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.188 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.795 AND INCHES MAXIMUM 0.805 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-12883 TO 2 |
| AFRL | ACCOMMODATED CONTACT QUANTITY | 7 |
| CRPY | CONTACT POSITION ARRANGEMENT STYLE | |
| CSKW | CONTACT MAXIMUM VOLTAGE IN VOLTS AND CURRENT TYPE | AC 500.0 AND DC 500.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.007 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| ADAL | BODY MOUNTING HOLE ACCOMMODATION DIAMETER | INCHES MAXIMUM 0.620 |
| AEJN | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.880 |
| AEVB | MOUNTING HOLE STYLE | |
| AFDM | CONTACT RESISTANCE IN OHMS | 0.015 |
| AFJE | SPECIFIC EQUIPMENT ACCOMMODATED | ELECTRON TUBE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 1.0 |
| AKWN | POLARIZATION TYPE | SLOT |
| AKXC | PROJECTION LENGTH BELOW MOUNTING SURFACE | INCHES MAXIMUM 0.547 |
| AXGY | MOUNTING METHOD | LOCATION NOT OTHERWISE SPECIFIED SADDLE |
| AXGY | MOUNTING METHOD | SHIELD BEAD |
| BCNX | MOUNTING TYPE FOR WHICH DESIGNED | CHASSIS |
| CBBL | FEATURES PROVIDED | CENTER SHIELD |
| SFTT | SURFACE TREATMENT | BASE SHIELD TIN |
| SFTT | SURFACE TREATMENT | CENTER SHIELD TIN |
| SFTT | SURFACE TREATMENT | CONTACT GOLD AND COPPER |
| SFTT | SURFACE TREATMENT | SADDLE TIN |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-12883 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 7 |
| MATT | MATERIAL | CENTER SHIELD COPPER ALLOY |
| MATT | MATERIAL | BODY PLASTIC |
| MATT | MATERIAL | BASE SHIELD COPPER ALLOY |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 69005-7713 | 28499 |
| 14-1049-00 | 80009 |
| MILS12883-2 | 81349 |
| M12883-02-02 | 81349 |
Supersedes
This item replaces cancelled NIIN 008282813. An older drawing citing one of those numbers resolves here.