NSN 5935-00-165-3370 · NIIN 001653370 · FSC 5935
NO DASHES 5935001653370
In Stock
INSERT,ELECTRICAL CONNECTOR
Connectors, Electrical
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.213 AND INCHES MAXIMUM 1.233 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.834 AND INCHES MAXIMUM 0.866 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| AEJN | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | INCHES MINIMUM 0.904 AND INCHES MAXIMUM 0.914 |
| AFQR | THREADED DEVICE TYPE | MOUNTING STUD |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRN | POLARIZATION METHOD | GUIDE PIN/SOCKET |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.270 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.112 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC DIALLYL PHTHALATE |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END MIL SPEC SINGLE MATERIAL RESPONSE -IL---14,TYE SDG-F OR MIL SPEC SINGLE MATERIAL RESPONSE -IL--19833,TYE GDI-30F |
| CXCG | INCLUDED CONTACT QUANTITY | 7 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.007 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-28748 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-28748-5 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILC28748-5 | 81349 |
| MIL-DTL-28748/5 | 81349 |
| MILC8384 | 81349 |
| M28748/5-A00G1A | 81349 |
| MS24004-3 | 96906 |
Supersedes
This item replaces cancelled NIIN 009004107. An older drawing citing one of those numbers resolves here.