NSN 5935-00-189-6883 · NIIN 001896883 · FSC 5935
NO DASHES 5935001896883
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 10.0 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CMLP | THREAD QUANTITY PER INCH | 8 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.187 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END ALL CONTACT GROUPINGS BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END ALL CONTACT GROUPINGS COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END ALL CONTACT GROUPINGS SILVER |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END ALL CONTACT GROUPINGS NONREMOVABLE |
| AFQW | MATING END QUANTITY | 1 |
| CQZG | INSERT MATERIAL | SINGLE MATING END PAPER |
| CSCF | TERMINAL TYPE | SINGLE MATING END ALL CONTACT GROUPINGS SOLDER WELL |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| CXCG | INCLUDED CONTACT QUANTITY | 3 |
| CXCG | INCLUDED CONTACT QUANTITY | 5 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END ALL CONTACT GROUPINGS ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | SILVER GRAINS, TROY 0.008 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| THSD | THREAD SERIES DESIGNATOR | UN |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 1.188 AND INCHES MAXIMUM 1.198 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.453 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.547 AND INCHES MAXIMUM 1.578 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.164 AND INCHES MAXIMUM 0.169 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 1.188 AND INCHES MAXIMUM 1.198 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.703 AND INCHES MAXIMUM 0.797 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.547 AND INCHES MAXIMUM 1.578 |