NSN 5935-00-237-1488 · NIIN 002371488 · FSC 5935
NO DASHES 5935002371488
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| CXCG | INCLUDED CONTACT QUANTITY | 5 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.025 |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| THSD | THREAD SERIES DESIGNATOR | DOUBLE STUB |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S17346 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.672 |
| CMLP | THREAD QUANTITY PER INCH | 10 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.250 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CQZG | INSERT MATERIAL | SINGLE MATING END RUBBER |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TYE 2,CLASS 1 |
| AAJD | THREAD CLASS | 2A |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.664 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.480 AND INCHES MAXIMUM 1.521 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.480 AND INCHES MAXIMUM 1.521 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION PROOF |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.172 AND INCHES MAXIMUM 0.182 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 1.140 AND INCHES MAXIMUM 1.172 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 1.140 AND INCHES MAXIMUM 1.172 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.797 AND INCHES MAXIMUM 0.807 |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 41.0 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-22992 |
| PRMT | PRECIOUS MATERIAL | GOLD |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-DTL-22992 | 81349 |
| MIL-C-22992 | 81349 |
| MS17346R18C11P | 96906 |
| MS17346R18N11P | 96906 |
| 4118805-28 | 05869 |
Supersedes
This item replaces cancelled NIIN 001031574. An older drawing citing one of those numbers resolves here.