NSN 5935-00-407-1717 · NIIN 004071717 · FSC 5935
NO DASHES 5935004071717
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFQR | THREADED DEVICE TYPE | BACK SHELL |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 1.370 AND INCHES MAXIMUM 1.380 |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.019 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.894 AND INCHES MAXIMUM 0.906 |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.500 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TYE 1,CLASS 1 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY 6061 |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-367,CO- 6061,T6 |
| CXCG | INCLUDED CONTACT QUANTITY | 19 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-81511 |
| THSD | THREAD SERIES DESIGNATOR | UN |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-81511 TO 21 |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| AFRP | INSERT POSITION IN DEG | 280.0 AND 218.0 AND 164.0 AND 67.0 |
| AFRT | SHELL TYPE | SOLID |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.695 AND INCHES MAXIMUM 1.711 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND PRESSURE PROOF AND VIBRATION PROOF |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.486 AND INCHES MAXIMUM 1.551 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.695 AND INCHES MAXIMUM 1.711 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.116 AND INCHES MAXIMUM 0.126 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 1.370 AND INCHES MAXIMUM 1.380 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 247ASC0167-163 | 30003 |
| M81511/21EJ04S1 | 81349 |
| MILC81511-21 | 81349 |
| 348-30E24-19S1 | 02660 |
| 348-30E24-19S1 | 05257 |
| SAE-AS81511/21 | 0U583 |
| M81511/21EJ04S1 | 0U583 |
| 348-30E24-19S1 | 13556 |
| 348-30E24-19S1 | 13511 |