NSN 5935-00-472-0212 · NIIN 004720212 · FSC 5935
NO DASHES 5935004720212
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.829 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.340 AND INCHES MAXIMUM 1.360 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-28748 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC DIALLYL PHTHALATE |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| AEJN | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | INCHES MINIMUM 2.495 AND INCHES MAXIMUM 2.505 |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END MIL SPEC SINGLE MATERIAL RESPONSE -IL---14,TYE SDG-F OR -IL---19833,TYE GDI-30F |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-28748 TO 9 |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.560 |
| AAJD | THREAD CLASS | 2A |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.865 AND INCHES MAXIMUM 2.885 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| CXCG | INCLUDED CONTACT QUANTITY | 104 |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFRN | POLARIZATION METHOD | POLARIZATION BOSS |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 0.812 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.807 AND INCHES MAXIMUM 0.817 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-DTL-28748/9 | 81349 |
| M28748/09F0EL1A | 81349 |
| M28748/9F0EL1A | 81349 |
| MIL-C-28748 | 81349 |
| 5935PL0947002 | 9009H |
| MS17778-1Y | 96906 |
| 4144500-85 | 05869 |