NSN 5935-00-484-0202 · NIIN 004840202 · FSC 5935
NO DASHES 5935004840202
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFRT | SHELL TYPE | SOLID |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.335 AND INCHES MAXIMUM 1.380 |
| CXCG | INCLUDED CONTACT QUANTITY | 55 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.055 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| AAJD | THREAD CLASS | 2A |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TYE 1,CLASS 2 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CHROMIUM |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.000 |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-81511 |
| THSD | THREAD SERIES DESIGNATOR | UN |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-81511 TO 1 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.964 AND INCHES MAXIMUM 0.975 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.765 AND INCHES MAXIMUM 0.775 |
| AFQR | THREADED DEVICE TYPE | BACK SHELL |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.116 AND INCHES MAXIMUM 0.126 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 0.964 AND INCHES MAXIMUM 0.974 |
| ADZC | ENVIRONMENTAL PROTECTION | PRESSURE PROOF AND MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.242 AND INCHES MAXIMUM 1.258 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.242 AND INCHES MAXIMUM 1.258 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1251-0071 | 33783 |
| 348+40E16+55S1 | 77820 |
| 348-40E16-55S1 | 77820 |
| MILC81511-1 | 81349 |
| M81511/01EE01S1 | 81349 |
| M81511-01E16-55S1 | 81349 |
| 7637589P118 | 99971 |
| 348+40E16+55S1 | 02660 |
| 348-40E16-55S1 | 02660 |
| SAE-AS81511/1 | 0U583 |
| M81511/01EE01S1 | 0U583 |
Supersedes
This item replaces cancelled NIIN 004988469. An older drawing citing one of those numbers resolves here.