NSN 5935-00-503-6128 · NIIN 005036128 · FSC 5935
NO DASHES 5935005036128
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.125 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 0.781 |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.016 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.062 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.062 |
| ADZC | ENVIRONMENTAL PROTECTION | PRESSURE PROOF AND WATERTIGHT |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC DIALLYL PHTHALATE |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| CSPT | SHELL MATERIAL | ALUMINUM |
| CXCG | INCLUDED CONTACT QUANTITY | 12 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES AND SILVER CONTACT SURFACES |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET LATCH |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD AND SILVER |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.012 AND SILVER GRAINS, TROY 0.012 |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES NOMINAL 0.438 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.781 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005429855. An older drawing citing one of those numbers resolves here.