NSN 5935-00-583-8498 · NIIN 005838498 · FSC 5935
NO DASHES 5935005838498
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.047 AND INCHES MAXIMUM 1.078 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 |
| AFRN | POLARIZATION METHOD | CONTACT |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.005 AND SILVER GRAINS, TROY 0.005 |
| AFRT | SHELL TYPE | SOLID |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.016 AND INCHES MAXIMUM 1.078 |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET LATCH |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.766 AND INCHES MAXIMUM 0.797 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.453 |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.047 AND INCHES MAXIMUM 1.078 |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CXCG | INCLUDED CONTACT QUANTITY | 5 |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD AND SILVER |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC DIALLYL PHTHALATE |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES AND SILVER CONTACT SURFACES |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 0.766 AND INCHES MAXIMUM 0.797 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| R883B20 | 32657 |
| 276MR27P1 | 3B150 |
| 276MS027P001 | 3B150 |
| 276M0027P001 | 3B150 |
| 276M0027P001 | 49956 |
| 276MS027P001 | 49956 |
| 276MR27P1 | 49956 |
| 276MR27P1 | 54X10 |
| 276MS027P001 | 54X10 |
| 276M0027P001 | 54X10 |
| 165-35 | 77820 |
| 165-35 | 02660 |
| 9176463 | 18876 |
Supersedes
This item replaces cancelled NIINs 005524506 · 007143841 · 007912314. An older drawing citing one of those numbers resolves here.