NSN 5935-00-846-7853 · NIIN 008467853 · FSC 5935
NO DASHES 5935008467853
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END ALL CONTACT GROUPINGS ROUND SOCKET |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 2.519 AND INCHES MAXIMUM 2.581 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 2.469 AND INCHES MAXIMUM 2.531 |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END ALL CONTACT GROUPINGS NONREMOVABLE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 41.0 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.625 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | INCHES 2.250 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END ALL CONTACT GROUPINGS BACK |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END ALL CONTACT GROUPINGS GOLD AND SILVER |
| CSCF | TERMINAL TYPE | SINGLE MATING END ALL CONTACT GROUPINGS SOLDER WELL |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| CXCG | INCLUDED CONTACT QUANTITY | 40 |
| CXCG | INCLUDED CONTACT QUANTITY | 7 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES AND SILVER CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.075 AND SILVER GRAINS, TROY 0.075 |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-5015 |
| THSD | THREAD SERIES DESIGNATOR | UN |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S3100 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 1.933 AND INCHES MAXIMUM 1.943 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.281 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.875 AND INCHES MAXIMUM 0.906 |
| AFQW | MATING END QUANTITY | 1 |
| AAQL | BODY STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.168 AND INCHES MAXIMUM 0.183 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 1.933 AND INCHES MAXIMUM 1.943 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-5015D | 81349 |
| MS3100R36-7SC | 96906 |
| MS3100A36-7S | 96906 |
| MS3100R36-7S | 96906 |
Supersedes
This item replaces cancelled NIINs 002279300 · 005523355. An older drawing citing one of those numbers resolves here.