NSN 5935-00-864-5178 · NIIN 008645178 · FSC 5935
NO DASHES 5935008645178
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.187 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 1.182 AND INCHES MAXIMUM 1.192 |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 1.182 AND INCHES MAXIMUM 1.192 |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| CXCG | INCLUDED CONTACT QUANTITY | 37 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.458 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.458 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-26482 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-26482 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD AND COPPER |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.037 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES NOMINAL 0.542 |
| AFRV | CONNECTOR LOCKING METHOD | DETENT |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| PRMT | PRECIOUS MATERIAL | GOLD |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILC26482 | 81349 |
| MILC81703 | 81349 |
| MS3130E7-50P | 96906 |
| MS3130E37-50P | 96906 |
| MS3130E37-50P | 0U583 |
| SAE-AS81703 | 0U583 |