NSN 5935-00-901-5782 · NIIN 009015782 · FSC 5935
NO DASHES 5935009015782
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-26482 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.431 AND INCHES MAXIMUM 0.462 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-26482 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.030 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 0.719 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.719 |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD AND COPPER |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CXCG | INCLUDED CONTACT QUANTITY | 6 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.978 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 0.934 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.934 |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
Cross-references
25 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PT02A-10-6P | 77820 |
| PT024A-10-6P | 77820 |
| MILC26482 | 81349 |
| MIL-DTL-26482 | 81349 |
| MS3112E10-6P | 81349 |
| 1203-09 | 82005 |
| 907D251-14 | 83843 |
| 061-45472 | 94697 |
| 416792-50 | 96214 |
| MS3112E-10-06PN | 96906 |
| CE213240 | 98230 |
| MS3112E10-6P | 96906 |
| 907D251-14 | 99167 |
| 1593528712B | A0810 |
| W41256D6101B10 | C0426 |
| 5M4541-222-24 | D1901 |
| 289303100110 | A3006 |
| 289303100110 | A0810 |
| PT02A10-6P | D8311 |
| 5L4541-004-44 | D1901 |
| MS3112E10-6P | D1371 |
| 4118836-48 | 05869 |
| 4118836-048 | 05869 |
| 371-2016-000 | 13499 |
| 371-2166-000 | 13499 |
Supersedes
This item replaces cancelled NIINs 005260691 · 006498320 · 008087617 · 008622458. An older drawing citing one of those numbers resolves here.