NSN 5935-00-928-0962 · NIIN 009280962 · FSC 5935
NO DASHES 5935009280962
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.556 AND INCHES MAXIMUM 0.587 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.672 |
| AAQL | BODY STYLE | |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL 3 |
| AFQJ | CABLE ENTRANCE DIAMETER | INCHES MINIMUM 1.024 |
| CXCG | INCLUDED CONTACT QUANTITY | 41 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRP | INSERT POSITION IN DEG | 315.0 |
| AFRT | SHELL TYPE | POTTING |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.453 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.453 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.041 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 1.156 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 1.156 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | POTTING TYPE |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-26482 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.120 |
| AFQW | MATING END QUANTITY | 1 |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-591 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S3110 |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD AND NICKEL |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC 1ST TREATMENT RESPONSE -IL-G-45204,TY 1,CL 1,GR C AND FED SPEC 2ND TREATMENT RESPONSE QQ-N-290,GR E |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS3110P20-41SW | 96906 |