NSN 5935-01-017-7280 · NIIN 010177280 · FSC 5935
NO DASHES 5935010177280
In Stock
CONNECTOR,PLUG,ELECTRICAL
Connectors, Electrical
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.738 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.125 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND THERMAL SHOCK RESISTANT |
| AFQJ | CABLE ENTRANCE DIAMETER | INCHES NOMINAL 0.216 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 335.0 |
| AFRF | CONTACT MAXIMUM FREQUENCY RATING | SINGLE MATING END SINGLE CONTACT GROUPING MEGAHERTZ 12400.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING NUT |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CRIMP TYPE |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.150 |
| ASDB | WIDTH ACROSS FLATS | INCHES MAXIMUM 0.400 |
| AWTN | OPERATING TEMP RATING | CELSIUS MINIMUM -65.0 AND CELSIUS MAXIMUM 165.0 |
| CMLP | THREAD QUANTITY PER INCH | 36 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC FLUORINATED ETHYLENE PROPYLENE AND PLASTIC POLYTETRAFLUOROETHYLENE |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TYE 2,CLASS 1 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| CSPT | SHELL MATERIAL | COPPER ALLOY |
| CSWM | SHELL SURFACE TREATMENT | GOLD AND COPPER |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST TREATMENT RESPONSE -IL-G-45204,TYE 2,CLASS 1 |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END FED SPEC 1ST MATERIAL RESPONSE L--389 OR FED SPEC 2ND MATERIAL RESPONSE L--403 |
| CXCG | INCLUDED CONTACT QUANTITY | 1 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING COAXIAL PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT AND BODY SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.105 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-39012 |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-39012 TO 56 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 230-990123-351 | 38753 |
| M39012/56-4009 | 81349 |
| MIL-C-39012/56 | 81349 |
| MIL-PRF-39012/56 | 81349 |