NSN 5935-01-186-6708 · NIIN 011866708 · FSC 5935
NO DASHES 5935011866708
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.665 AND INCHES MAXIMUM 1.685 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES MINIMUM 1.295 AND INCHES MAXIMUM 1.305 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.520 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.560 AND INCHES MAXIMUM 0.580 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.149 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| AFRN | POLARIZATION METHOD | POLARIZATION BOSS |
| AFRV | CONNECTOR LOCKING METHOD | SCREW |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.138 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC DIALLYL PHTHALATE |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END MIL SPEC SINGLE MATERIAL RESPONSE -IL---14,TYE SDG-F |
| CXCG | INCLUDED CONTACT QUANTITY | 10 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACE |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-28748 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 048638BASIC | 22915 |
| MRS0010P03BN300 | 73293 |
| MRS0010P03BV300 | 73293 |
| MIL-DTL-28748/9 | 81349 |
| M28748/9A0NL2A | 81349 |
| MILC28748-9 | 81349 |
Supersedes
This item replaces cancelled NIINs 004360923 · 004521224. An older drawing citing one of those numbers resolves here.