NSN 5945-01-190-7603 · NIIN 011907603 · FSC 5945
NO DASHES 5945011907603
In Stock
RELAY,ELECTROMAGNETIC
Relays and Solenoids
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.320 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 1.070 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 0.617 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.410 |
| ABTD | MOUNTING SLOT WIDTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.120 |
| ADZC | ENVIRONMENTAL PROTECTION | HERMETIC |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AKDX | WINDING QUANTITY | 2 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| APCN | COIL QUANTITY | 2 |
| APNA | WINDING DC RESISTANCE RATING | ALL WINDINGS KILOHMS NOMINAL 3.8 |
| APNP | DUTY TYPE | CONTINUOUS |
| APNQ | ARC QUENCHING METHOD | AIR |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SINGLE MOUNTING FACILITY SLOTTED HOLE 2 |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| CBBL | FEATURES PROVIDED | POLARIZED AND LATCHING CONTACTS |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.334 |
| CQYJ | MOUNTING FACILITY PATTERN | SINGLE MOUNTING FACILITY IN-LINE |
| CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | POLE, DOUBLE THROW, ONE POSITION MOMENTARY 2 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CRXH | TIME DELAY | FIXED OPERATE TIME SECONDS MAXIMUM 0.005 |
| CSXF | OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | ALL WINDINGS VOLTS DC 25 DEG CELSIUS 48.0 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | RESISTIVE LOAD MILLIAMPERES AC 150.0 AND AMPERES DC 2.0 |
| CWAB | MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | AC 115.0 AND DC 28.0 |
| FEAT | SPECIAL FEATURES | FAILURE RATE LEVEL 3.0 PERCENT |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39016 |
| TTQY | TERMINAL TYPE AND QUANTITY | ALL FUNCTIONS PIN 10 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39016 TO 45 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M5757/76-016 | 81349 |
| MIL-PRF-39016/45 | 81349 |
| M39016/45-027L | 81349 |
| MIL-R-39016/45 | 81349 |