NSN 5945-01-371-1257 · NIIN 013711257 · FSC 5945
NO DASHES 5945013711257
In Stock
RELAY,ELECTROMAGNETIC
Relays and Solenoids
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.718 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.625 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.010 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.025 |
| ABTD | MOUNTING SLOT WIDTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.150 |
| ADZC | ENVIRONMENTAL PROTECTION | HERMETIC |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSS | FREQUENCY IN HERTZ | MAXIMUM 400.0 |
| AKDX | WINDING QUANTITY | 1 |
| APCN | COIL QUANTITY | 1 |
| APNP | DUTY TYPE | CONTINUOUS |
| APNQ | ARC QUENCHING METHOD | AIR |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SINGLE MOUNTING FACILITY SLOTTED HOLE 3 |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| CQYJ | MOUNTING FACILITY PATTERN | SINGLE MOUNTING FACILITY TRIANGLE |
| CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | POLE, DOUBLE THROW, TWO POSITIONS MOMENTARY 4 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSQJ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | SINGLE MOUNTING FACILITY INCHES MINIMUM 1.396 AND INCHES MAXIMUM 1.446 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | MOTOR LOAD AMPERES AC 4.0 AND AMPERES DC 4.0 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | RESISTIVE LOAD AMPERES AC 10.0 AND AMPERES DC 10.0 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | LAMP LOAD AMPERES AC 2.0 AND AMPERES DC 2.0 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | INDUCTIVE LOAD AMPERES AC 8.0 AND AMPERES DC 8.0 |
| CWAB | MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | AC 115.0 |
| FEAT | SPECIAL FEATURES | FAILURE RATE 3.0 PERCENT PER 10,000 CYCLES; TEMP RANGE MINUS 70.0 DEG TO PLUS 125.0 DEG C; SOCKET PIN TERMINAL RELAY HAS SILICONE GASKET 0.050 INCH NOMINAL THICKNESS POSITIONED AGAINST BOTTOM OF CASE AT THE BASE OF 0.270 INCH NOMINAL LENGTH PINS; SOCKET PIN TERMINAL RELAYS HAVE 0.062 INCH DIA PINS |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD SOCKET IN TER-INALS |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-6106 AND STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). 81349--IL-RF-83536 |
| TTQY | TERMINAL TYPE AND QUANTITY | ALL FUNCTIONS PIN 14 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S27400 AND GOVERNMENT STANDARD 81349--IL-RF-83536A |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| L503300049 | 36090 |
| 705141-105 | 58475 |
| KA-D4K-300L | 58657 |
| MIL-R-6106 | 81349 |
| MIL-R-83536 | 81349 |
| M83536/17-005M | 81349 |
| M83536/17-005L | 81349 |
| MIL-PRF-83536 | 81349 |
| MS27400-34 | 81349 |
| MIL-PRF-83536/17 | 81349 |
| M83536/17-005 | 81349 |
| MS27400-34 | 96906 |
| MS27400-28 | 96906 |
| MS27400-34P | 96906 |
| MS27400-34U | 96906 |
Supersedes
This item replaces cancelled NIIN 014429419. An older drawing citing one of those numbers resolves here.