NSN 5950-00-620-7844 · NIIN 006207844 · FSC 5950
NO DASHES 5950006207844
In Stock
TRANSFORMER,POWER
Coils and Transformers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAU | BODY HEIGHT | INCHES MAXIMUM 2.750 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 10 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| BPLC | WINDING FUNCTION AND QUANTITY | SINGLE COMPONENT PRIMARY 1 AND SECONDARY 2 |
| AEHZ | MAXIMUM OPERATING TEMP | CELSIUS 210.0 |
| ACZB | FREQUENCY RATING | SINGLE COMPONENT HERTZ NOMINAL 400.0 |
| ACZC | INPUT-OUTPUT PHASE RELATIONSHIP | SINGLE COMPONENT THREE PHASE TO THREE PHASE |
| AXGY | MOUNTING METHOD | SINGLE GROUP UNTHREADED HOLE(S) |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 5.800 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 97151-69C37506 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 2.990 AND INCHES MAXIMUM 3.010 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 3.720 AND INCHES MAXIMUM 3.780 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| CWJS | WINDING OPERATING VOLTAGE | SINGLE COMPONENT ALL SECONDARY AC VOLTS MINIMUM 20.70 |
| CWJS | WINDING OPERATING VOLTAGE | SINGLE COMPONENT SINGLE PRIMARY AC VOLTS MINIMUM 195.00 AND AC VOLTS MAXIMUM 210.00 |
| ACZD | TRANSFORMER WINDING CONNECTION TYPE | WYE-DELTA AND WYE-WYE |
| CRBZ | WINDING OPERATING CURRENT | SINGLE COMPONENT ALL SECONDARY AMPERES AC NOMINAL 42.0 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 3.740 AND INCHES MAXIMUM 3.760 |
| ABTB | MOUNTING HOLE DIAMETER | SINGLE GROUP INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210 |
| AKNA | INCLOSURE TYPE | OPEN |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 17032 | 26569 |
| 5000550 | 24930 |
| K-5875 | 51181 |
| 59T11C1831 | 59523 |
| 69C37506 | 97151 |