NSN 5950-00-840-5406 · NIIN 008405406 · FSC 5950
NO DASHES 5950008405406
In Stock
COIL,RADIO FREQUENCY
Coils and Transformers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGS | DC RESISTANCE RATING IN OHMS | 0.058 |
| CRHJ | QUALITY FACTOR | SINGLE COMPONENT SINGLE WINDING MINIMUM 85 |
| ACYV | INDUCTANCE RATING | SINGLE COMPONENT SINGLE WINDING MICROHENRIES MINIMUM 1.28 AND MICROHENRIES MAXIMUM 2.13 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES NOMINAL 0.281 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE GROUP UNF |
| AKNA | INCLOSURE TYPE | OPEN |
| AXGY | MOUNTING METHOD | SINGLE GROUP THREADED BUSHING |
| ACZU | ADJUSTMENT DEVICE DRIVE TYPE | SINGLE COMPONENT SLOTTED SCREW |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.094 |
| CQJX | NOMINAL THREAD SIZE | SINGLE GROUP INCHES 0.190 |
| CQPZ | WINDING CONDUCTOR SIZE | SINGLE COMPONENT SINGLE WINDING INCHES AMERICAN WIRE GAGE 0.01594 |
| ACZR | CORE CONSTRUCTION | SINGLE COMPONENT POWDERED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHY | TURN QUANTITY | 16 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) C4545-91820 |
| BKPL | RATING METHOD | SINGLE COMPONENT SINGLE WINDING ELECTRICAL AND WINDING TURNS |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CTHD | ADJUSTMENT METHOD AND QUANTITY | SINGLE COMPONENT ADJUSTABLE CORE 1 |
| ACZP | COIL FORM TYPE | SINGLE COMPONENT HOLLOW |
| TTQY | TERMINAL TYPE AND QUANTITY | COLLAR/RING 2 |