NSN 5950-01-007-9311 · NIIN 010079311 · FSC 5950
NO DASHES 5950010079311
In Stock
TRANSFORMER,PULSE
Coils and Transformers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 1.234 AND INCHES MAXIMUM 1.266 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 1.140 AND INCHES MAXIMUM 1.172 |
| ABTB | MOUNTING HOLE DIAMETER | SINGLE GROUP INCHES MINIMUM 0.191 AND INCHES MAXIMUM 0.201 |
| ACYW | IMPEDANCE RATING IN OHMS | SINGLE COMPONENT SINGLE PRIMARY NOMINAL 2.0 |
| ACZH | PRIMARY TO SECONDARY TURN RATIO | 1 TO 7 |
| ACZN | PULSE REPETITION RATE | SINGLE COMPONENT KILOHERTZ 3.0 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.375 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 1.500 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 3.062 |
| AEHZ | MAXIMUM OPERATING TEMP | CELSIUS 170.0 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AXGY | MOUNTING METHOD | SINGLE GROUP UNTHREADED HOLE(S) |
| BPLC | WINDING FUNCTION AND QUANTITY | SINGLE COMPONENT PRIMARY 1 AND SECONDARY 1 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2534905 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 4 |