NSN 5955-00-008-2636 · NIIN 000082636 · FSC 5955
NO DASHES 5955000082636
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -40.0 TO 70.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 AND -0.003 TO 0.003 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 5300.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 19.5 AND MAXIMUM 20.5 |
| AEHG | SPECIFIED FREQUENCY | KILOHERTZ 199.000 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 26 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-3098/26 | 81349 |
| MIL-PRF-3098/26 | 81349 |
| CR47/U199K0000 | 81349 |
| CR47AU | 03040 |
| CR47AU | 09747 |