NSN 5955-00-011-7527 · NIIN 000117527 · FSC 5955
NO DASHES 5955000117527
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.998 AND INCHES MAXIMUM 1.023 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 73.600 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 32 |
| STYL | STYLE DESIGNATOR | |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHC | MODE OF OSCILLATION | FIFTH OVERTONE |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 50.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR23U | 80058 |
| MIL-PRF-3098/32 | 81349 |
| CR54/U73M60000 | 81349 |
| CR23U | 81349 |
| MIL-C-3098/32 | 81349 |
| MS91379 | 96906 |
| 291-86555-00 | 13499 |
Supersedes
This item replaces cancelled NIIN 005381163. An older drawing citing one of those numbers resolves here.