NSN 5955-00-129-8281 · NIIN 001298281 · FSC 5955
NO DASHES 5955001298281
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 30.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.020 TO 0.020 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 50.0 |
| MATT | MATERIAL | COVER HOLDER PLASTIC |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-10405 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.593 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.468 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.797 AND INCHES MAXIMUM 0.827 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.110 AND INCHES MAXIMUM 1.140 |
| ADUM | OVERALL THICKNESS | INCHES MINIMUM 0.407 AND INCHES MAXIMUM 0.447 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.091 AND INCHES MAXIMUM 0.095 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | NOMINAL 13.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 8.650 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.486 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -40.0 TO 70.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-10405 TO 5 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR-6/U8.650000MHZ | 81349 |
| MIL-C-10405/5 | 81349 |