NSN 5955-00-189-2923 · NIIN 001892923 · FSC 5955
NO DASHES 5955001892923
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 29.5 AND MAXIMUM 30.5 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.998 AND INCHES MAXIMUM 1.023 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 570.0 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 TO 62 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 109 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 1.0003 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -40.0 TO 90.0 AND CELSIUS -55.0 TO 105.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 8.0 AND MILLIWATTS MAXIMUM 12.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 AND -0.003 TO 0.003 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NE6A | 19397 |
| CR130/U1M000000 | 81349 |
| MIL-C-3098/109 | 81349 |
| MIL-PRF-3098/109 | 81349 |
| NE6A | 00815 |
Supersedes
This item replaces cancelled NIIN 009127638. An older drawing citing one of those numbers resolves here.