NSN 5955-00-245-5850 · NIIN 002455850 · FSC 5955
NO DASHES 5955002455850
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.563 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.057 AND INCHES MAXIMUM 0.067 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 27.21667 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 75.0 |
| STYL | STYLE DESIGNATOR | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.020 AND INCHES MAXIMUM 1.090 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHC | MODE OF OSCILLATION | FIFTH OVERTONE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR24U | 81349 |
| CR24/U27M21667 | 81349 |
| MIL-C-3098/6 | 81349 |
| CR-24/U27.216670MHZ | 81349 |
Supersedes
This item replaces cancelled NIIN 001325914. An older drawing citing one of those numbers resolves here.