NSN 5955-00-252-5263 · NIIN 002525263 · FSC 5955
NO DASHES 5955002525263
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.720 |
| ADPR | BODY THICKNESS | INCHES NOMINAL 0.315 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.345 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.800 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.192 AND INCHES MAXIMUM 0.217 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.750 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.565 AND INCHES MAXIMUM 0.583 |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 27.5 AND MAXIMUM 28.5 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 6.15208 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.476 AND INCHES MAXIMUM 0.496 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 50.0 TO 85.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.007 TO 0.007 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 50.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC16836 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-16836 | 81349 |
| 40162 | 81349 |
| 40162-6152-08KC | 81349 |