NSN 5955-00-568-2400 · NIIN 005682400 · FSC 5955
NO DASHES 5955005682400
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 90.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 40.34074 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 0.8 AND MILLIWATTS MAXIMUM 1.2 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.001 TO 0.001 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| STYL | STYLE DESIGNATOR | |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.001 TO 0.001 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.00025 TO 0.00025 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 40.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR65/U | 23875 |
| CR65/U | 52847 |
| CR-65/U40.340741MHZ | 81349 |
| CR-65/U40.340740MHZ | 81349 |
| MIL-PRF-3098/43 | 81349 |
| MILC3098-43 | 81349 |
| CR65/U40M34074 | 81349 |
| CR65/U | 00809 |
| CR65/U | 00136 |
| CR65/U | 13571 |
| ER65/U | 13571 |
| CR65U | 18853 |
Supersedes
This item replaces cancelled NIIN 012800291. An older drawing citing one of those numbers resolves here.