NSN 5955-00-577-7846 · NIIN 005777846 · FSC 5955
NO DASHES 5955005777846
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 AND CELSIUS -55.0 TO 90.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 0.8 AND MILLIWATTS MAXIMUM 1.2 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE AND FIFTH OVERTONE |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.00025 TO 0.00025 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098-43 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 44.54167 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.001 TO 0.001 AND -0.003 TO 0.003 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 40.0 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 90.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILC3098-43 | 81349 |
| CR-65/U44.541670MHZ | 81349 |
| CR65/U44M54167 | 81349 |
| MIL-PRF-3098/43 | 81349 |
Supersedes
This item replaces cancelled NIIN 008522040. An older drawing citing one of those numbers resolves here.