NSN 5955-00-686-7253 · NIIN 006867253 · FSC 5955
NO DASHES 5955006867253
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 8.0 AND MILLIWATTS MAXIMUM 12.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.001 TO 0.001 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.007 TO 0.007 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.00025 TO 0.00025 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 40.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 36.66666 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 90.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| STYL | STYLE DESIGNATOR | |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR-65/U36.666660MHZ | 81349 |
| MILC3098-43 | 81349 |
| MIL-PRF-3098/43 | 81349 |
| CR65/U36M66666 | 81349 |
| CR-65/U36.666670MHZ | 81349 |
Supersedes
This item replaces cancelled NIIN 009466831. An older drawing citing one of those numbers resolves here.