NSN 5955-00-691-0488 · NIIN 006910488 · FSC 5955
NO DASHES 5955006910488
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFGA | OPERATING TEMP RANGE | CELSIUS 80.0 TO 90.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 2.0 AND MILLIWATTS MAXIMUM 3.0 |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 31.2 AND MAXIMUM 32.5 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.182 AND INCHES MAXIMUM 0.202 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.042 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 22.0 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 85.0 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 80.0 |
| ADPR | BODY THICKNESS | INCHES MINIMUM 0.145 AND INCHES MAXIMUM 0.155 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 11.150 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.002 TO 0.002 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.395 AND INCHES MAXIMUM 0.405 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.652 AND INCHES MAXIMUM 0.750 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.410 AND INCHES MAXIMUM 0.430 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.432 AND INCHES MAXIMUM 0.470 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| ADUM | OVERALL THICKNESS | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.180 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-3098/85 | 81349 |
| CR-109/U11.150000MHZ | 81349 |
| CR109/U11M150000 | 81349 |
| MIL-PRF-3098/85 | 81349 |
| RD24300-1-16 | 00724 |