NSN 5955-00-762-1887 · NIIN 007621887 · FSC 5955
NO DASHES 5955007621887
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 50.0 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| STYL | STYLE DESIGNATOR | |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.530 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.402 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.150 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.183 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.200 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 60 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.435 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 AND -0.003 TO 0.003 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 88.350 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.753 AND INCHES MAXIMUM 0.778 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.042 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -40.0 TO 90.0 AND CELSIUS -55.0 TO 105.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 TO 38 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| AEHC | MODE OF OSCILLATION | FIFTH OVERTONE AND THIRD OVERTONE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR83/U88M35000 | 81349 |
| MIL-C-3098/60 | 81349 |
| CR-83/U88.350000MHZ | 81349 |
| MIL-PRF-3098/60 | 81349 |