NSN 5955-00-763-5983 · NIIN 007635983 · FSC 5955
NO DASHES 5955007635983
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.200 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 AND CELSIUS -55.0 TO 125.0 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.435 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.530 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.402 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.150 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 300.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 90 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.650 AND INCHES MAXIMUM 0.660 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 83149--IL-C-3098 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 0.8 AND MILLIWATTS MAXIMUM 1.2 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 AND -0.0010 TO 0.0010 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 3.300 |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 31.5 AND MAXIMUM 32.5 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.042 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.183 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-3098/90 | 81349 |
| MIL-C-3098/90 | 81349 |
| CR114/U3M300000 | 81349 |
| 289-5607-00 | 00136 |
| 289-5607-00 | 13499 |