NSN 5955-00-763-5988 · NIIN 007635988 · FSC 5955
NO DASHES 5955007635988
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.042 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 TO 38 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.650 AND INCHES MAXIMUM 0.660 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.435 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.530 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 300.0 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 31.5 AND MAXIMUM 32.5 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 3.200 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 AND CELSIUS -55.0 TO 125.0 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.150 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 90 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 0.8 AND MILLIWATTS MAXIMUM 1.2 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 AND -0.0010 TO 0.0010 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.402 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.183 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.200 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-3098/90 | 81349 |
| CR114/U3M200000 | 81349 |
| MIL-PRF-3098/90 | 81349 |
| 289-5605-00 | 00136 |
| 289-5605-00 | 13499 |