NSN 5955-00-781-0415 · NIIN 007810415 · FSC 5955
NO DASHES 5955007810415
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.749 AND INCHES MAXIMUM 1.774 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.012 TO 0.012 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MINIMUM 3.7 AND MAXIMUM 5.1 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 70000.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.476 AND INCHES MAXIMUM 0.496 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.526 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 28 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -40.0 TO 70.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 0.1 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| AEHG | SPECIFIED FREQUENCY | KILOHERTZ 72.000 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SMB536055 | 80063 |
| MIL-C-3098/28 | 81349 |
| CR50A/U72K00000 | 81349 |
| CR50/U72K00000 | 81349 |
| 536055 | 92110 |
Supersedes
This item replaces cancelled NIIN 009260230. An older drawing citing one of those numbers resolves here.