NSN 5955-00-788-9878 · NIIN 007889878 · FSC 5955
NO DASHES 5955007889878
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 3.450 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.435 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.150 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.140 |
| STYL | STYLE DESIGNATOR | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.650 AND INCHES MAXIMUM 0.660 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 0.8 AND MILLIWATTS MAXIMUM 1.2 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 AND -0.0010 TO 0.0010 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.183 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.042 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 TO 38 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 90 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.530 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 31.5 AND MAXIMUM 32.5 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 300.0 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.200 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 AND CELSIUS -55.0 TO 125.0 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.402 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR114/U3M450000 | 81349 |
| MIL-PRF-3098/90 | 81349 |
| MIL-C-3098/90 | 81349 |
| 289-5610-00 | 00136 |
| 289-5610-00 | 13499 |