NSN 5955-00-892-3204 · NIIN 008923204 · FSC 5955
NO DASHES 5955008923204
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 8.0 AND MILLIWATTS MAXIMUM 12.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 185.0 |
| STYL | STYLE DESIGNATOR | |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 1.900 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILC3098-4 | 81349 |
| CR19/U1M900000 | 81349 |
| MIL-PRF-3098/4 | 81349 |
| CR-19A/U1.900000MHZ | 81349 |
| CR-19A/U1900KHZ | 09062 |
Supersedes
This item replaces cancelled NIIN 006884295. An older drawing citing one of those numbers resolves here.