NSN 5955-00-892-3231 · NIIN 008923231 · FSC 5955
NO DASHES 5955008923231
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.238 |
| AEHC | MODE OF OSCILLATION | FIFTH OVERTONE |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 50.0 |
| STYL | STYLE DESIGNATOR | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 76.458 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.486 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.050 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 2.0 AND MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR-54A/U76.458000MHZ | 81349 |
| MILC3098-32 | 81349 |
| MIL-PRF-3098/32 | 81349 |
| CR54/U76M45800 | 81349 |