NSN 5955-00-892-3444 · NIIN 008923444 · FSC 5955
NO DASHES 5955008923444
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.050 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.238 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--ILC3098 TO 3 |
| STYL | STYLE DESIGNATOR | |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | NOMINAL 32.0 AND MINIMUM 31.5 AND MAXIMUM 32.5 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 3.050 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.486 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 110.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 10.0 AND MILLIWATTS MINIMUM 8.0 AND MILLIWATTS MAXIMUM 12.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-3098/3 | 81349 |
| MIL-C-3098/3 | 81349 |
| CR18/U3M050000 | 81349 |
| 117837 | 06481 |
| 290-8754-00 | 13499 |
Supersedes
This item replaces cancelled NIINs 006592572 · 009581563 · 009538933. An older drawing citing one of those numbers resolves here.