NSN 5955-00-901-3746 · NIIN 009013746 · FSC 5955
NO DASHES 5955009013746
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.998 AND INCHES MAXIMUM 1.023 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 5300.0 |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 19.5 AND MAXIMUM 20.5 |
| AEHG | SPECIFIED FREQUENCY | KILOHERTZ 108.000 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.002 TO 0.002 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 26 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -40.0 TO 70.0 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| STYL | STYLE DESIGNATOR | |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-3098/26 | 81349 |
| MIL-PRF-3098/26 | 81349 |
| CR47/U198K0000 | 81349 |