NSN 5955-00-914-6464 · NIIN 009146464 · FSC 5955
NO DASHES 5955009146464
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHG | SPECIFIED FREQUENCY | KILOHERTZ 212.800 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | NOMINAL 20.0 AND MINIMUM 19.5 AND MAXIMUM 20.5 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.050 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 2.0 AND MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.238 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 5300.0 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.002 TO 0.002 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -40.0 TO 70.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.486 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR-47A/U212.800KHZ | 81349 |
| CR47/U212K8000 | 81349 |
| MIL-PRF-3098/26 | 81349 |
| MILC3098-26 | 81349 |