NSN 5955-00-923-8302 · NIIN 009238302 · FSC 5955
NO DASHES 5955009238302
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHC | MODE OF OSCILLATION | FIFTH OVERTONE |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 2.0 AND MILLIWATTS MINIMUM 1.8 AND MILLIWATTS MAXIMUM 2.2 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 AND -0.007 TO 0.007 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 40.0 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.050 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS 0.0 TO 80.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.486 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0002 TO 0.0002 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 5.5 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2521304 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.0005 TO 0.0005 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.236 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RG1-904-218 | 35784 |
| 2521304-4 | 10001 |