NSN 5955-00-926-7323 · NIIN 009267323 · FSC 5955
NO DASHES 5955009267323
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.183 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 AND CELSIUS -55.0 TO 125.0 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.042 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 AND -0.0010 TO 0.0010 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.200 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 TO 38 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 58 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 40.0 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.530 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.402 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.753 AND INCHES MAXIMUM 0.778 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.435 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 36.800 |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE AND FIFTH OVERTONE |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.150 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-3098/58 | 81349 |
| CR81/U36M80000 | 81349 |
| MIL-C-3098/58 | 81349 |