NSN 5955-00-926-7341 · NIIN 009267341 · FSC 5955
NO DASHES 5955009267341
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 AND -0.0010 TO 0.0010 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 AND CELSIUS -55.0 TO 125.0 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 TO 38 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 58 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.753 AND INCHES MAXIMUM 0.778 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.435 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.530 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 41.200 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.200 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.042 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.402 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.150 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.183 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE AND FIFTH OVERTONE |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 40.0 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-3098/58 | 81349 |
| CR81/U41M20000 | 81349 |
| MIL-C-3098/58 | 81349 |