NSN 5955-00-928-5598 · NIIN 009285598 · FSC 5955
NO DASHES 5955009285598
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | COVER HOLDER GLASS |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 4.0 AND MILLIWATTS MAXIMUM 6.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 10.000000 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.200 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 AND CELSIUS -55.0 TO 125.0 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.435 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098-50 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| STYL | STYLE DESIGNATOR | |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.015 AND INCHES MAXIMUM 0.019 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.530 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.525 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.150 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.183 |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 29.5 AND MAXIMUM 30.5 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 AND -0.0010 TO 0.0010 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 30.0 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.402 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR64/U-10M0 | 81349 |
| CR64/U10M00000 | 81349 |
| MIL-PRF-3098/42 | 81349 |
| MILC3098-42 | 81349 |
| CR-64/U10.000MHZ | 81349 |
| 289-7082-030 | 13499 |
| CY12A | 13454 |
Supersedes
This item replaces cancelled NIIN 013585620. An older drawing citing one of those numbers resolves here.