NSN 5955-00-930-6048 · NIIN 009306048 · FSC 5955
NO DASHES 5955009306048
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -40.0 TO 70.0 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.775 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 21.0 AND MAXIMUM 22.0 |
| AEHG | SPECIFIED FREQUENCY | KILOHERTZ 215.000 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.002 TO 0.002 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.032 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 3000.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 79 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.500 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 0081202-1 | 74306 |
| CR104/U215K0000 | 81349 |
| MIL-C-3098/79 | 81349 |
| MIL-PRF-3098/79 | 81349 |
Supersedes
This item replaces cancelled NIIN 008546494. An older drawing citing one of those numbers resolves here.