NSN 5955-00-940-2966 · NIIN 009402966 · FSC 5955
NO DASHES 5955009402966
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.005 TO 0.005 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| STYL | STYLE DESIGNATOR | |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 4.0 AND MILLIWATTS MAXIMUM 6.0 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.007 TO 0.007 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 90.0 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 90.0 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--ILC3098 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 3.733333 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | NOMINAL 32.0 AND MINIMUM 31.5 AND MAXIMUM 32.5 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILC3098-9 | 81349 |
| CR-27A/U3.733333MHZ | 81349 |
| MIL-PRF-3098/9 | 81349 |
| CR27/U3M733333 | 81349 |