NSN 5955-00-950-5747 · NIIN 009505747 · FSC 5955
NO DASHES 5955009505747
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 90.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 0.8 AND MILLIWATTS MAXIMUM 1.2 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.007 TO 0.007 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.001 TO 0.001 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.00025 TO 0.00025 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 40.0 |
| STYL | STYLE DESIGNATOR | |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 37.95555 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR-65/U37.955550MHZ | 81349 |
| MILC3098-43 | 81349 |
| MIL-PRF-3098/43 | 81349 |
| CR65/U37M95555 | 81349 |