NSN 5955-00-951-5804 · NIIN 009515804 · FSC 5955
NO DASHES 5955009515804
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.00025 TO 0.00025 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.007 TO 0.007 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 1.0 AND MILLIWATTS MINIMUM 0.8 AND MILLIWATTS MAXIMUM 1.2 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.001 TO 0.001 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 90.0 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 40.0 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 40.22222 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| STYL | STYLE DESIGNATOR | |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILC3098-43 | 81349 |
| CR-65/U40.222220MHZ | 81349 |
| MIL-PRF-3098/43 | 81349 |
| CR65/U40M22222 | 81349 |