NSN 5955-00-951-9019 · NIIN 009519019 · FSC 5955
NO DASHES 5955009519019
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.023 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 80.0 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 22.0 |
| STYL | STYLE DESIGNATOR | |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.233 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 13.000 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.008 TO 0.008 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 85.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 80.0 TO 90.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 2.0 AND MILLIWATTS MAXIMUM 3.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 31.5 AND MAXIMUM 32.5 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR36/U13M00000 | 81349 |
| MIL-PRF-3098/16 | 81349 |
| CR-36A/U13.000000MHZ | 81349 |
| MILC3098-16 | 81349 |