NSN 5955-00-951-9023 · NIIN 009519023 · FSC 5955
NO DASHES 5955009519023
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.238 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.008 TO 0.008 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 24.0 |
| STYL | STYLE DESIGNATOR | |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | NOMINAL 32.0 AND MINIMUM 31.5 AND MAXIMUM 32.5 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 80.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.486 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 5.0 AND MILLIWATTS MINIMUM 4.0 AND MILLIWATTS MAXIMUM 6.0 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.050 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 85.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 80.0 TO 90.0 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 9.666667 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR-36A/U9.666667MHZ | 81349 |
| MIL-PRF-3098/16 | 81349 |
| CR36/U9M666667 | 81349 |
| MILC3098-16 | 81349 |